-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
The sample is prepared, and then submergned in various types…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein described are used to determine properties…
-
ASTM A931 – Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931 – This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force,
yield strength, elongation, and modulus of elasticity….
-
ASTM C297 – Flatwise Tensile Strength of Sandwich Constructions
ASTM C297 – This test method determines the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D4595 – Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4595 – This test method covers the measurement of tensile properties of geotextiles using a wide-width strip specimen tensile method.
This test method is applicable to most geotextiles that include woven…
-
ASTM D4833 – Index Puncture Resistance of Geomembranes and Related Products
ASTM D4833 – This test method is used to measure the index puncture resistance of geomembranes and related products.
The use of Test Method D 4833 may be inappropriate for testing some…
-
ASTM D6241 –Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D6241 test method is a test used to determine the puncture resistance of geotextiles and similar products.
The method is very similar to ASTM D4833, where a test specimen is secured into a…
-
ASTM D695 – Compressive Properties of Rigid Plastics
ASTM D695 – describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sample being used.
The test can be…
-
ASTM D790 – Flexural Properties of Unreinforced and Reinforced Plastics
ASTM D790 – This test method is used to determine the flexural properties of unreinforced and reinforced plastics, including high modulus composites and electrical insulating
materials utilizing a three-point loading system…
-
ASTM E643 – Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM E643 – This test method covers the procedure for conducting the ball punch deformation test for metallic sheet materials intended for forming applications.
The test applies to specimens with thicknesses between…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06