-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C1161 – Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 specifies a procedural overview for the bend testing of ceramics.
ASTM C1161 requires a three point and a four point bend test of the ceramic specimen.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C1550 – Flexural Toughness of Fiber Reinforced Concrete
Flexural Toughness Testing of Fiber Reinforced Concrete
ASTM C1550 – This test method covers the determination of flexural toughness of fiber-reinforced concrete expressed as energy absorption in the
post-crack range using a… -
ASTM C1609-Flexural Performance of Fiber-Reinforced Concrete
ASTM C1609 – This test method evaluates the flexural performance of fiber-reinforced concrete using parameters derived from the load-deflection curve obtained
by testing a simply supported beam under third-point loading using a…
-
ASTM C273 – Shear Properties of Sandwich Core Materials
ASTM C273 – This test method covers the determination of shear properties of sandwich construction core materials associated with shear distortion of
planes parallel to the facings.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C307 – Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C307 –This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets.
These materials include mortars, brick and tile grouts, machinery grouts,…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear properties of the core.
This batch of tests is used as a shear test…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393– This test method covers determination of the properties of flat sandwich constructions subjected to flatwise flexure in… -
ASTM C394 – Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.Bilgi Almak İçin Lütfen…
-
ASTM C633 – Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the coating
in a tension…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06