-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
The sample is prepared, and then submergned in various types…
-
ASTM C297 – Flatwise Tensile Strength of Sandwich Constructions
ASTM C297 – This test method determines the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D1002 – Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
-
ASTM D3167 – Floating Roller Peel Resistance of Adhesives
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 – Tape Tensile Strength + Elongation
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile…
-
ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate unwind tape either with a human…
-
ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255 – A Testing Fixture
ASTM D4255 – This test method indicates the cutting properties in the plane of a high modulus fiber-reinforced composite materials by two procedures.
Bilgi Almak İçin Lütfen…
-
ASTM D575 – Rubber Properties in Compression
ASTM D575 – This test method cover two test procedures for determining the compression-deflection characteristics of rubber compounds other than
those usually classified as hard rubber and sponge rubber.
Bilgi Almak İçin Lütfen…
-
ASTM D6484 – Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6484 – This test method determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced
by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06