-
Arazi Tipi CBR Deney Cihazı, 50 kN
STANDARTLAR : BS 1377:9; 1924:2; ASTM D4429; UNI 10009
CBR Deney Cihazı , yol inşaatlarında, sıkıştırılmış toprak zeminde, taşıma kapasitesinin yerinde belirlenmesi için kullanılır.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
Asfalt Elek Seti, Ø 200 mm
STANDARTLAR : EN 993-1, EN933-2, ASTM E11, AASTHO T27, BS 410
Asfalt Elek kasnak çapı 200 mm
Elek kasnakları paslanmaz çelikten imal edilmektedir
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
Asfalt Elek Seti, Ø 300 mm
STANDARTLAR : EN 993-1, EN933-2, ASTM E11, AASTHO T27, BS 410
Elek kasnak çapı 300 mm dir ve elek kasnakları paslanmaz çelikten imal edilmektedir
-
ASTM A1034 – Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1034 – This test method covers the testing of mechanical splices for reinforcing bars.
The test methods herein described are applicable to any type of mechanical splice manufactured to join steel…
-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
The sample is prepared, and then submergned in various types…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein described are used to determine properties…
-
ASTM A48 – Standard Specification for Gray Iron Castings
ASTM A48 – This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.
Castings are classified on the basis of the tensile strength of… -
ASTM A931 – Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931 – This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force,
yield strength, elongation, and modulus of elasticity….
-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C1161 – Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 specifies a procedural overview for the bend testing of ceramics.
ASTM C1161 requires a three point and a four point bend test of the ceramic specimen.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06