-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 – Intergranular Attack on Austenitic Steel
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
Please Contact With…
-
ASTM B406 – Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B406 Cemented Carbides Transverse Rupture Fixture
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which
is…
-
ASTM C1230 – Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – This test method covers determination of the tensile load capacity of glass-fiber reinforced concrete (GFRC) bonding…
-
ASTM C365 – Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM C365 – Sandwich Core Compression Testing
ASTM C365 – This test method covers the determination of compressive strength and modulus of sandwich cores.
These properties are usually determined for… -
ASTM C393 – Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear…
-
ASTM D1062 – Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D3167- Floating Roller Peel Test Fixture
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
ASTM D3167 is similar to the ASTM D1781 Climbing Drum Peel…
-
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
*** It is commonly used for composites…
-
ASTM D903 – Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D903 – This test method covers the determination of the comparative peel or stripping characteristics of adhesive bonds when tested on standard-sized
specimens and under defined conditions of pretreatment, temperature,… -
ASTM E643 – Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM E643 – This test method covers the procedure for conducting the ball punch deformation test for metallic sheet materials intended for forming applications.
The test applies to specimens with thicknesses between… -
ASTM F1554 – Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1554 – Tensile Test for Steel Anchor Bolts
ASTM F1554 – This specification covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron,
alloy, or… -
ASTM F3125 – Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F3125 – This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and
alloy steel, in inch and metric dimensions, in two strength grades, two…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06