ASTM D1414 – Standard Test Methods for Rubber O-Rings
ASTM D1414 – Rubber O-Ring Testing
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are also commonly tested under this standard to test their tensile strength and elongation characteristics.
Please Contact With Us For More Information
- Description
- TECHNICAL SPECIFICATIONS
Description
ASTM D1414 – Standard Test Methods for Rubber O-Rings
ASTM D1414 – Rubber O-Ring Testing
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are also commonly tested under this standard to test their tensile strength and elongation characteristics.
Significance and Use
This test method provides acceptable procedures for quality control purposes and for the determination of engineering characteristics.
O-ring Roller Sizes
The fixture can use interchangeable rollers at different sizes. The standard sizes that PARSROS carries are 3.18, 4.5, 4.75, 6.35, 12.7, 15, 18.3, 22.3, and 25mm.
Referenced Documents
ASTM Standards
ASTM D297 Test Methods for Rubber ProductsChemical Analysis
ASTM D395 Test Methods for Rubber Property–Compression Set
ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension
ASTM D471 Test Method for Rubber Property–Effect of Liquids
ASTM D573 Test Method for Rubber–Deterioration in an Air Oven
ASTM D865 Test Method for Rubber–Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D1329 Test Method for Evaluating Rubber Property–Retraction at Lower Temperatures (TR Test)
ASTM D1415 Test Method for Rubber Property–International Hardness
ASTM D2240 Test Method for Rubber Property–Durometer Hardness
ASTM D3767 Practice for Rubber–Measurement of Dimensions
ASTM D4483 Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Aerospace Standard
AS568A Oring Sizes Standardization Documents Order Desk, Bldg. 4 Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
***PARSROS offers several types of grips and fixtures which will enable you to perform a variety of tests that are
accurate and repeatable.
Please contact with our engineers so that we can find and offer Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations
