ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

Açıklama

ASTM D6252 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D6252 – This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks.

This test method gives a measure of the adherence to a standard steel substrate or to other surfaces of interest for a pressure-sensitive label stock.

This test method provides a means of assessing the uniformity of the adhesion of a given type of pressure-sensitive label stock.

The assessment may be within a sheet or roll, between sheets or rolls, or between production lots.

Variations in the label stock facestock and adhesive can affect the response; therefore, this test method cannot be used to pinpoint the specific cause(s)

of nonuniformity.

This test method may not be appropriate to test label stocks having either stiff backings or backings showing a high stretch at low forces.

These characteristics could result in a high variability of the test response, which is not a true indication of the real nature of the adhesive bond.

*** Before conducting ASTM D6252 , it is important to read the entire specification in the relevant ASTM  publication.

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests  that are

accurate and repeatable.