Electromechanical Test Machine, 50 kN

Description

Product Code	Product Description
PRS-UEM050	Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

 

Electromechanical Test Machine, 50 kN

STANDARDS  : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1

PRS-UEM050, 50 kN capacity fully automatic  Electromechanical  Test Machine is multi purpose versatile machine which satisfies the requirement

of R&D laboratories, university laboratories, institute laboratoriesand quality control laboratories for tensile, compression flexural tests under load or displacement

control for a wide range of materials.

PRS-UEM050 model Electromechanical Test  Machine can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable

accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.

The Testing Machine consists of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics

data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests.

User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an

servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell.

*** Gripping systems, extensometers and accessories are  not included and have to be ordered separately.

---

Accessories Of Electromechanical Test Machine

Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete,

Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez),Tiles, Flat Blocks etc.

General Accessories;

Load Cell, 5 kN Capacity

Load Cell, 50 kN Capacity

Load Cell, 300 kN Capacity

Compression Platens, used to perform uniaxial and unconfined compression tests.

Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ø:22 mm specimens)

Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature,  standard temperature range: -40°C to +100°C (-40°F to 212°F).