ISO 10328 – Structural Testing of Lower Limb Prostheses
ISO 10328 specifies procedures for static and cyclic strength tests on lower-limb prostheses which typically produce compound loadings by the application
of a single test force.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- Açıklama
- TEKNİK ÖZELLİKLER
Açıklama
ISO 10328 – Structural Testing of Lower Limb Prostheses
It Specifies procedures for static and cyclic strength tests on lower-limb prostheses which typically produce compound loadings by the application
of a single test force.
The compound loads in the test sample relate to the peak values of the components of loading which normally occur at different instants during the stance
phase of walking.
The tests described in ISO 10328 are comprised of: principal static and cyclic tests of single components; a separate static test in torsion; separate static and
cyclic tests on ankle-foot devices and foot units; a separate static ultimate strength test in maximum knee flexion on knee joints and associated parts for all knee
units; and separate static and cyclic tests on knee locks.
The tests described in this ISO 10328 apply to specific types of ankle-disarticulation prostheses including: transtibial (below-knee), knee-disarticulation and
transfemoral (above-knee) prostheses and to the distal (lower) part of hip-disarticulation, and hemi-pelvectomy prostheses.
*** Before conducting ISO 10328 , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.
***PARSROS offers several types of grips and fixtures which will enable you to perform a variety of tests
that are accurate and repeatable.
