ISO 13934-1 Tensile Properties of Fabrics

Description

ISO 13934-1 Textiles — Tensile Properties of Fabrics 

Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method

ISO 13934-1 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.

The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre,

mechanical, or chemical treatment.

It can be applicable to fabrics produced by other techniques.

It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns

The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for

testing, and of test specimens in the wet state.

The method is restricted to the use of constant rate of extension (CRE) testing machines.

*** Before conducting this ISO standard  , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests

  that are accurate and repeatable

Please Contact  with our engineers so that we can find and offer  Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations