ISO 13953 – Polyethylene (PE) Pipes and Fittings
ISO 13953 2 1
ISO 13953 Standard Test Fixture 3
ISO 13953 Standard Test Fixture 4
ISO 13953 Standard Test Fixture 5
ISO 13953 Standard Test Fixture 6
ISO 13953 Standard Test Fixture 7
ISO 13953 Standard Test Fixture 8
ISO 13953 Standard Test Fixture 9
ISO 13953 Standard Test Fixture 10
ISO 13953 Standard Test Fixture 11
ISO 13953 Standard Test Fixture 12
ISO 13953 Standard Test Fixture 13
ISO 13953 Standard Test Fixture 14
ISO 13953 Standard Test Fixture 15
ISO 13953 Standard Test Fixture 16
ISO 13953 Standard Test Fixture 17
ISO 13953 Standard Test Fixture 18
ISO 13953 Standard Test Fixture 19
ISO 13953 – Polyethylene (PE) Pipes and Fittings
ISO 13953 - Polyethylene (PE) Pipes and Fittings - Görsel 2
ISO 13953 Standard Test Fixture 3
ISO 13953 Standard Test Fixture 4
ISO 13953 Standard Test Fixture 5
ISO 13953 Standard Test Fixture 6
ISO 13953 Standard Test Fixture 7
ISO 13953 Standard Test Fixture 8
ISO 13953 Standard Test Fixture 9
ISO 13953 Standard Test Fixture 10
ISO 13953 Standard Test Fixture 11
ISO 13953 Standard Test Fixture 12
ISO 13953 Standard Test Fixture 13
ISO 13953 Standard Test Fixture 14
ISO 13953 Standard Test Fixture 15
ISO 13953 Standard Test Fixture 16
ISO 13953 Standard Test Fixture 17
ISO 13953 Standard Test Fixture 18
ISO 13953 Standard Test Fixture 19

ISO 13953 – Polyethylene (PE) Pipes and Fittings

ISO 13934-1 Tensile Properties of Fabrics ISO 13934-1 Tensile Properties of Fabrics
ISO 13954 Peel Decohesion Test for Polyethylene (PE) ISO 13954 – Peel Decohesion Test for Polyethylene (PE)
0 out of 5
( Henüz değerlendirme yapılmadı. )

ISO 13953 describes a test method for determination of the tensile strength and tensile failure mode of butt-fused polyethylene (PE) pipe assemblies.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

Kategoriler: Etiketler: , ,

Açıklama

ISO 13953 – Polyethylene (PE) Pipes and Fittings 

Determination of the Tensile Strength and Failure Mode of Test Pieces from a Butt-Fused Joint

 

ISO 13953 describes a test method for determination of the tensile strength and tensile failure mode of butt-fused polyethylene (PE) pipe assemblies.

The method is applicable to butt-fused joints between PE pipes with a nominal outside diameter of not less than 90mm.

The method may be used, together with other test methods, to evaluate the quality of the butt-fused joints.

*** Before conducting this ISO standard  , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.

 

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests

  that are accurate and repeatable

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“ISO 13953 – Polyethylene (PE) Pipes and Fittings” için yorum yapan ilk kişi siz olun

Teknik Detaylar İçin Lütfen Bizimle İletişime Geçiniz 

Please Contact  with our engineers so that we can find and offer  Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations