ISO 8510-1 Adhesive Peel Test

Description

ISO 8510-1 – Adhesives — Peel Test for a Flexible-Bonded-to-Rigid Test Specimen Assembly

 Part 1: 90 degree peel

ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delaminate.

A bonded assembly of two adherends is prepared using the adhesive under test.

The adherends are then pulled apart at a steady rate, starting at the open end of the bond, in such a way that separation occurs progressively along the length of the

bonded adherends.

The force is applied approximately normal to the plane of the bond, through the separated part of the flexible adherend. A figure shows a schematic diagram.

*** Before conducting this ISO standard  , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests

  that are accurate and repeatable

Please Contact  with our engineers so that we can find and offer  Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations