Semi-Automatic Digital Bitumen Penetrometer

Description

Product Code	Product Description
PRS-ASFSADBP40	Semi-Automatic Digital Bitumen Penetrometer 220-240 V 50-60 Hz
PRS-ASFSADBP40/110	Semi-Automatic Digital Bitumen Penetrometer 110 V 60 Hz
PRS-ASFSADBP41	Transfer Dish
PRS-ASFSADBP42	Sample Cup, Ø 55×35 mm, stainless steel
PRS-ASFSADBP43	Sample Cup, Ø 70×45 mm, stainless steel
PRS-ASFSADBP44	Penetration Needle, 2,5 g
PRS-ASFSADBP60	One-Quarter Scale Cone and Shaft, ASTM D 1403 and D 1831,
PRS-ASFSADBP61	One-Half Scale Cone and Shaft, ASTM D 1403 and D 1831,
PRS-ASFSADBP62	Penetrometer Cone ASTM D 217 (Optional Type) and ASTM D 937, Brass
PRS-ASFSADBP63	Resilience Ball Penetration Tool. ASTM D5329,

 

Semi-Automatic Digital Bitumen Penetrometer

STANDARDS : EN 1426; ASTM D5; AASHTO T49

Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature.

The Penetrometer consists of a cast iron base with coarse and fine levelling screws, a digital penetration measurement gauge 0.01 mm readability and a penetration

timer unit.

Start button of the penetration timer unit is used to release the plunger fitted with the needle to start the 5 seconds test.

*** A water bath (25±0,1 C) and a thermometer ( IP38, ASTM 17C or 63C ) required for the test should be ordered separately.

---

*** Semi-Automatic Digital Bitumen Penetrometer is supplied complete with;

Penetration Needle, 2,5g, 1 pieces

Transfer Dish

Sample Cup Ø 55×35 mm, 3 pieces, stainless steel