• Mortar Permeability Tester, 3 Unit

    This method of test covers the procedure for determining the permeability to water of the pozzolana mortar prepared and cured under specified conditions,

    by measuring the percolation of water through Standard…

  • MOT Straightedge

    STANDARDS : EN 13036-7

    Straightedge  is used to measure irregularities of road pavement, floors, concrete pavement.

    Please Contact With Us For More Information

  • Motorized Hydraulic Specimen Extruder,Horizontal Type, 60 kN

    STANDARDS : TS EN 13286-2, 13286-47, 12697-30; AASHTO T134, T180, T193, T245; ASTM D698, D1557, D1883, D1559; BS 1377-4, 1924-2, 598-107

    Motorized Specimen Extruder, Horizontal Type,  is designed for extruding specimens…

  • Motorized Hydraulic Specimen Extruder,Vertical Type, 60 kN

    STANDARDS : TS EN 13286-2, 13286-47, 12697-30; AASHTO T134, T180, T193, T245; ASTM D698, D1557, D1883, D1559; BS 1377-4, 1924-2, 598-107

    Motorized Hydraulic Extruder, Vertical Type, is designed for extruding specimens…

  • Mud Balance

    STANDARDS : API Recommended Practice  Procedure

    It is an ideal equipment for site applications, provides an accurate and easy method for determining the mud density.

    Please Contact With Us For More…

  • Muffle Furnaces

    STANDARDS:  TS EN 196-2, 196-21,459-2

    Muffle Furnaces are widely used for determining various properties of construction materials They cover a temperature range from 1100°C to 1600°C

    Please Contact With Us For…

  • Munsell Geological Rock-Color Chart

    Included are 115 color chips with the Munsell numerical designation for identifying the range of rock colors.

    Works with either wet or dry specimens.

    Please Contact With Us For More Information

     

  • Munsell Soil Colour Book

    STANDARDS : BS 1377:3

    Munsell Soil Chart provides a simple method for soil classification by of determining the color of soil specimens.

    Please Contact With Us For More Information

  • NASM 1312-13 Test Fixture

    The Aerospace Industries Association publishes NASM 1312-13, Fastener Test Methods for Double Shear Tests.

    Please Contact With Us For More Information

  • NASM 1312-20 Test Fixture

    MIL-STD-1312-20 / NASM 1312-20 – These fixtures are used to test, in single shear, fasteners (typically metallic) which are not long enough to be tested in double shear.

    Please Contact With Us…

  • Neoprene Pads & Capping Retainers For Concrete Cylinders

    STANDARDS : ASTM C1231, AASHTO T22,T851

    Unbonded Capping is a safe, accurate, and economical alternative to the use of hot sulfur capping compound for compressive strength tests of concrete specimens.

    Please Contact

  • NIST Portland Cement, No. 114q

    STANDARDS  : AASHTO T 192 , AASHTO T 153 , AASHTO T 98, , ASTM C204

    NIST Portland Cement, No. 114q is used in the verification and calibration of equipment for…