Ürünler | Page 52 of 59 | Parsros Material Testing Equipments

Salt Spray Test Cabinet

Salt Spray Test Cabinet has a standardized test method to check corrosion resistence of coated samples.

Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated…
Sand Absorption ( Abraham Cone ) Set

STANDARDS : EN 1097-6; BS 812-2; UNI 8520-13-16; ASTM C128; NLT 154; DIN 12039

Test Set is used for determining the specific gravity and water absorption of fine aggregates smaller than 10 mm.

Please
Sand Bath

Device is a common piece of laboratory equipment made from a container filled with heated sand.

It is used to provide even heating for another container, most often during a chemical…
Sand Cone Test Sets

STANDARDS : ASTM D1556; AASHTO T181, T191

Sand Cone Sets are used for the determination of the degree of compaction on site.

Please Contact With Us For More Information
Sand Content Test Kit

Sand content is the volume percentage of particles larger than 74 microns. Periodic determination of the sand content in a drilling fluid is desirable.

Please Contact With Us For More…
Sand Equivalent Shaker

STANDARDS : EN 933-8 / ASTM D2419 / AASHTO T176 / BS 1924 / UNI 8520-15 / UNE 83131

It is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at…
Sand Equivalent Test Sets

STANDARDS : EN 933–8; ASTM D2419; AASHTO T176; UNI 8520–15; UNE 83131; CNR No. 27

The Sand Equivalent Test Set is used to determine the fines of aggregates.

Please Contact With Us For…
Sand Replacement Test Sets

STANDARDS : BS 1377:9, 1924:2

Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray.

Please Contact…
Saybolt Viscometer

STANDARDS : ASTM D88-D244,AASHTO T72

This Viscometer is used to determine the viscosity of petroleum products at specified temperatures between 70 to 210 °F.

Please Contact With Us For More Information
Semi-Automatic Digital Bitumen Penetrometer

STANDARDS : EN 1426; ASTM D5; AASHTO T49

Semi-Automatic Digital Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature.

Please Contact With Us For More…
Semi-Automatic Digital Cone Penetrometers

STANDARDS : BS 1377:2; NF P94-052-1; CEN ISO/TS 17892-6, 17892-12

Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used…
Servo Hydraulic Fatique Testing Machine

STANDARDS

ISO 12106:2017 , ISO 1099 , ISO 4965-1, ISO 4965-2, AFNOR A 03-403:1990 , BS 7270:2006 , ASTM E 606-12, ASTM C1368 , ASTM C394 , ASTM D3479 , ASTM D7774 ,

ASTM E2207 , ASTM E2368 , ASTM E2714 , ASTM E466 , ASTM E467 , ASTM E606 , ASTM E647 , ASTM F1612 , ASTM F1717 , ASTM F1798 , ASTM F1800 , ASTM F1820 ,

ASTM F2118 , ASTM F2193 , ASTM…