• TAPPI T 825 Test Fixture

    TAPPI T 825 – The flat crush test (1) is a measure of the resistance of the flutes in corrugated board to a crushing force applied perpendicular to the surface

    of…

  • TAPPI T 829 Test Fixture

    TAPPI T 829 describes a qualitative method for evaluating the relative quality of scores in corrugated containers

    Please Contact With Us For More Information

  • TAPPI T231 Test Fixture

    TAPPI T231 provides a quick, reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry.

    Please Contact With Us For More Information

  • TAPPI T541 Test Fixture

    TAPPI T541 Z-directional tensile test describes a procedure for measuring the internal fiber bond strength (z-direction tensile strength) of paperboard using

    an instrument that subjects a normal separation force to a…

  • TAPPI T821 Test Fixture

    TAPPI T821 is used to measure the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facings.

    Please Contact With Us For More Information

  • Tell Tale Monitors

    Standard Tell-Tales are precision gauges that consist of two plates which overlap for a part of their length.

    Thebottom plate is calibrated in milli-metres and the top plate is transparent and marked…

  • Thickness Gauge (Flakiness Index) BS

    STANDARDS : BS 812-105.1

    Thickness Gauge is used to determine if the aggregate particles are to be considered as flaky, i.e. their thickness is less than 0.6 of their nominal size.

    Please…

  • Three Gang Cement Cube Mould, ASTM

    STANDARDS :  EN 196-1; ASTM C109; BS 4550

    50 x 50 x 50 mm, Three Gang Cement  Mould is used for the determination of linear shrinkage/expansion of cement mortar when used…

  • Three Gang Cement Mould, 40 x 40 x 160 mm, Steel

    STANDARDS : EN 196-1; ASTM C109; BS 4550

    40 X 40 X 160 mm , Three Gang Cement Mould is used for the determination of linear shrinkage/expansion of cement mortar when

    used together…

  • Transtech  Non-Nuclear Pavement Quality Indicator (PQI 380)

    Transtech  Non-Nuclear Pavement Quality Indicator (PQI 380)

    This version of the PQI is fully equipped with a touch screen and a user friendly graphical user interface.

    Please Contact With Us For More…

  • Travelling Beam Device

    It is used to check for any irregularities in both concrete and bituminous road surfaces.

    Please Contact With Us For More Information

  • Two Gang Cement Prism Mould, 75 x 75 x 285 mm

    STANDARDS : UNI 11604

    Cement Prism Moulds are used for  determination of potential reactivity of alkali in aggregates for use in concrete

    Please Contact With Us For More Information