-
ASTM C394 – Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.
Permissible core material forms… -
ASTM C557 – Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C557 covers the minimum performance standards for and properties of adhesives intended to bond the back surface paper of gypsum wallboard to wood framing
members.
Please Contact With Us For More Information
-
ASTM C633 – Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the
coating in a tension… -
ASTM C719 Test Fixture
ASTM C719 is an accelerated laboratory procedure for evaluating the performance of a building sealant in a test configuration that is subjected to water immersion,
cyclic movement, and temperature change
Please Contact With…
-
ASTM C736 Test Fixture
ASTM C736 covers a laboratory procedure for the determination of the extension-recovery and adhesion of latex sealants.
Please Contact With Us For More Information
-
ASTM C78 Test Fixture
ASTM C78 covers the determination of the flexural strength of concrete by the use of a simple beam with third-point loading
Please Contact With Us For More Information
-
ASTM C947 – Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM C961 – Standard Test Method for Lap Shear Strength of Sealants
ASTM C961 – This test method measures the cohesive strength of sealants when subjected to shear stresses, and also provides information regarding the adhesive bond to
the substrates being tested.
Please Contact With…
-
ASTM D1000 – Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1000 – This test method covers several test methods for the characterization of tapes used in electrical applications.
Please Contact With Us For More Information
-
ASTM D1002 – Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1062 – Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D1414 – Standard Test Methods for Rubber O-Rings
ASTM D1414 – Rubber O-Ring Testing
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06