-
ASTM C557 – Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C557 covers the minimum performance standards for and properties of adhesives intended to bond the back surface paper of gypsum wallboard to wood framing
members.
Please Contact With Us For More Information
-
ASTM C961 – Standard Test Method for Lap Shear Strength of Sealants
ASTM C961 – This test method measures the cohesive strength of sealants when subjected to shear stresses, and also provides information regarding the adhesive bond to
the substrates being tested.
Please Contact With…
-
ASTM D1002 – Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2095 – Tensile Adhesives Testing Equipment
ASTM D2095 – This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens
under… -
ASTM D4501 – Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501 – Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher thanthe…
-
ASTM D897 Test Fixture
ASTM D897 Tensile Strength Test Equipment for Metal to Metal Adhesive Bonds
ASTM D897 – This test method covers the determination of the comparative tensile properties of the adhesive bonds of metal…
-
ASTM D903 – Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D903 – This test method covers the determination of the comparative peel or stripping characteristics of adhesive bonds when tested on standard-sized
specimens and under defined conditions of pretreatment, temperature,… -
EN 1372 Test Fixture
EN 1372 specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces.
Please Contact With Us…
-
EN 1465 Test Fixture
EN 1465 specifies a method for determining the tensile lap-shear strength of bonded assemblies when tested on a standard specimen and under specified
conditions of preparation and testing.
Please Contact With…
-
EN 28510-1 Test Fixture
EN 28510-1 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends
Please Contact With Us For More Information
-
ISO 4578 – Peel Resistance of High Strength Adhesive Bonds
This ISO standard specifies a floating-roller method for the determination of the peel resistance of high-strength adhesive bonds between a rigid adherend and a flexible
adherend when tested under specified conditions…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06