-
ASTM A1034 – Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1034 – This test method covers the testing of mechanical splices for reinforcing bars.
The test methods herein described are applicable to any type of mechanical splice manufactured to join steel…
-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein described are used to determine properties…
-
ASTM A48 – Standard Specification for Gray Iron Castings
ASTM A48 – This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.
Castings are classified on the basis of the tensile strength of… -
ASTM A931 – Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931 – This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force,
yield strength, elongation, and modulus of elasticity….
-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C1161 – Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 specifies a procedural overview for the bend testing of ceramics.
ASTM C1161 requires a three point and a four point bend test of the ceramic specimen.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C1550 – Flexural Toughness of Fiber Reinforced Concrete
Flexural Toughness Testing of Fiber Reinforced Concrete
ASTM C1550 – This test method covers the determination of flexural toughness of fiber-reinforced concrete expressed as energy absorption in the
post-crack range using a… -
ASTM C1609-Flexural Performance of Fiber-Reinforced Concrete
ASTM C1609 – This test method evaluates the flexural performance of fiber-reinforced concrete using parameters derived from the load-deflection curve obtained
by testing a simply supported beam under third-point loading using a…
-
ASTM C273 – Shear Properties of Sandwich Core Materials
ASTM C273 – This test method covers the determination of shear properties of sandwich construction core materials associated with shear distortion of
planes parallel to the facings.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C297 – Flatwise Tensile Strength of Sandwich Constructions
ASTM C297 – This test method determines the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06