-
ASTM C307 – Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C307 –This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets.
These materials include mortars, brick and tile grouts, machinery grouts,…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear properties of the core.
This batch of tests is used as a shear test…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393– This test method covers determination of the properties of flat sandwich constructions subjected to flatwise flexure in… -
ASTM C394 – Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.Bilgi Almak İçin Lütfen…
-
ASTM C633 – Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the coating
in a tension… -
ASTM C947 – Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM D1002 – Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1062 – Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D1414 – Rubber O-Rings
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are also commonly tested under this… -
ASTM D143 – Small Clear Specimens of Timber
ASTM D143 – This test method covers the determination of various strength and related properties of wood by testing small clear specimens.
This test method represents procedures for evaluating the different… -
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06