-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM C1135 – Tensile Adhesion Properties of Structural Sealants
ASTM C1135 – This test method covers a laboratory procedure for quantitatively measuring the tensile adhesion properties of structural sealants, hereinafter
referred to as the “sealant”.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – This test method covers determination of the tensile load capacity of glass-fiber reinforced concrete (GFRC) bonding…
-
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – This test method covers the determination of residual strength of a fiber–reinforced concrete test beam.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C307 – Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C307 –This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets.
These materials include mortars, brick and tile grouts, machinery grouts,…
-
ASTM C365 – Flatwise Compressive Properties of Sandwich Cores
ASTM C365 – Sandwich Core Compression Testing
ASTM C365 – This test method covers the determination of compressive strength and modulus of sandwich cores.
These properties are usually determined for… -
ASTM D2519 – Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
Bond Strength Test Fixture
ASTM D2519 – This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM D575 – Rubber Properties in Compression
ASTM D575 – This test method cover two test procedures for determining the compression-deflection characteristics of rubber compounds other than
those usually classified as hard rubber and sponge rubber.
Bilgi Almak İçin Lütfen…
-
ASTM D876 – Polymer Tube Tensile Test
ASTM D876 – This test method covers the testing of general-purpose (Grade A), low-temperature (Grade B), and high-temperature (Grade C)2 nonrigid vinyl chloride
polymer tubing, or its copolymers with other materials,…
-
EN 12814-4 Test Fikstürü
EN 12814-4 specifies the dimensions, the method of sampling and the preparation of the test specimens, and also the conditions for performing the peel test
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ISO 1922 – Determination of Shear Properties of Rigid Cellular Plastics
This ISO standard specifies a procedure of determining the shear strength of rigid cellular plastics. It also provides for the determination of shear modulus and shear strain.
Bilgi Almak İçin Lütfen…
-
ISO 527-2 Tensile Testing For Plastics
ISO 527-2 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527‑1.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06