-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 – Intergranular Attack on Austenitic Steel
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
Please Contact With…
-
ASTM C1135 – Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1135 – This test method covers a laboratory procedure for quantitatively measuring the tensile adhesion properties of structural sealants, hereinafter
referred to as the “sealant”.
Please Contact With Us For More…
-
ASTM C633 – Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the
coating in a tension… -
ASTM D1062 – Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2095 – Tensile Adhesives Testing Equipment
ASTM D2095 – This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens
under… -
ASTM D413 – Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D413 – This test method covers the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the
rubber layer in articles made from rubber… -
ASTM D5450 – Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5450 – This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers.
It describes…
-
ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
Composite Fracture Toughness Testing
ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using the double… -
ASTM D6671 – Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
MIXED-MODE BENDING FRACTURE TOUGHNESS
ASTM D6671 – This test method covers the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode
I to Mode II loading ratios using the… -
ASTM D7078 – Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078 V-notched Rail Shear Fixture
ASTM D7078 – This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a
V-notched specimen between…
-
ASTM D7291 – Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291 – Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291– This test method determines the through-thickness “flatwise” tension strength and elastic modulus… -
ASTM E238 – Standard Test Method for Pin-Type Bearing Test of Metallic Materials
Pin-Type Bearing Test of Metallic Materials
ASTM E238 – This test method covers a pin-type bearing test of metallic materials to determine bearing yield strength and bearing strength.Please Contact With Us…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06