-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear properties of the core.
This batch of tests is used as a shear test…
-
ASTM C394 – Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.Bilgi Almak İçin Lütfen…
-
ASTM D1002 – Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
-
ASTM D3330 – Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Bilgi Almak İçin…
-
ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate unwind tape either with a human…
-
ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255 – A Testing Fixture
ASTM D4255 – This test method indicates the cutting properties in the plane of a high modulus fiber-reinforced composite materials by two procedures.
Bilgi Almak İçin Lütfen…
-
ASTM D5379 – Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379 Iosipescu Shear Test Fixture
ASTM D5379 – This test method determines the shear properties of composite materials reinforced by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D5961- Bearing Response of Polymer Matrix Composite Laminates
ASTM D5961 – This test method determines the bearing response of multi-directional polymer matrix composite laminates reinforced by high-modulus fibers
by either double-shear (Procedure A) or single-shear (Procedure B) tensile loading…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06