-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear properties of the core.
This batch of tests is used as a shear test…
-
ASTM C394 – Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.Bilgi Almak İçin Lütfen…
-
ASTM D1002 – Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
-
ASTM D3330 – Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 – Tape Tensile Strength + Elongation
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile…
-
ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate unwind tape either with a human…
-
ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255 – A Testing Fixture
ASTM D4255 – This test method indicates the cutting properties in the plane of a high modulus fiber-reinforced composite materials by two procedures.
Bilgi Almak İçin Lütfen…
-
ASTM D5379 – Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379 Iosipescu Shear Test Fixture
ASTM D5379 – This test method determines the shear properties of composite materials reinforced by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D5961- Bearing Response of Polymer Matrix Composite Laminates
ASTM D5961 – This test method determines the bearing response of multi-directional polymer matrix composite laminates reinforced by high-modulus fibers
by either double-shear (Procedure A) or single-shear (Procedure B) tensile loading…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06