Tensile Test | Parsros Material Testing Equipments

ASTM C1230 – Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

0 out of 5

ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

ASTM C1230 – This test method covers determination of the tensile load capacity of glass-fiber reinforced concrete (GFRC) bonding…
ASTM D1002 – Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

0 out of 5

ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.

The test is applicable for determining adhesive strength, surface preparation parameters,…
ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

0 out of 5

ASTM D2105 – Fiberglass Tensile Test Equipment

ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment,…
ASTM D3967 – Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

0 out of 5

ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.

Please Contact…
ASTM D4541 – Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

0 out of 5

ASTM D4541 – Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system…
ASTM D7291 – Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

0 out of 5

ASTM D7291 – Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291– This test method determines the through-thickness “flatwise” tension strength and elastic modulus…
BS EN 12814 – 2 Test Fixture

0 out of 5

BS EN 12814 – 2 specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test

in order to determine the…

ASTM C1230 – Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

ASTM D1002 – Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

ASTM D3967 – Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

Please Contact…

ASTM D4541 – Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

ASTM D7291 – Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

BS EN 12814 – 2 Test Fixture

USEFUL LINKS

OPENING HOURS