Asphalt | Page 3 of 4 | Parsros Material Testing Equipments

Marshall Manual Compaction Assembly

0 out of 5

STANDARDS : ASTM D6926, D5581; AASTHO T245 (only for PRS-AS0071 ); BS-598

Marshall Manual Assemblies are used to prepare Marshall specimens manually.

The Compaction Assemblies consist of a Marshall Compaction Hammer and a Wooden…
Marshall Stability Test Machine with Proving Ring

0 out of 5

STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245

50 kN capacity Marshall Stability Test Machine is used to determine the maximum load and flow values of…
Marshall Water Bath

0 out of 5

STANDARDS : ASTM D1559 , EN 12697-34 , AASHTO T245

ParsRos Water Baths are used in various material testing analyses. 15, 30 and 48 lt. tank capacity models are available and…
MOT Straightedge

0 out of 5

STANDARDS : EN 13036-7

Straightedge is used to measure irregularities of road pavement, floors, concrete pavement.

Please Contact With Us For More Information
Open Cup Flash Point Tester

0 out of 5

STANDARDS: ASTM D1310, D3143

TAG Open Cup Flash Point Device is used for determination of flash points of.

Please Contact With Us For More Information
Reflux Extractor Test Set

0 out of 5

STANDARDS : ASTM D2172; AASHTO T164 B

Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.

Please Contact With Us For More Information
Sand Content Test Kit

0 out of 5

Sand content is the volume percentage of particles larger than 74 microns. Periodic determination of the sand content in a drilling fluid is desirable.

Please Contact With Us For More…
Saybolt Viscometer

0 out of 5

STANDARDS : ASTM D88-D244,AASHTO T72

This Viscometer is used to determine the viscosity of petroleum products at specified temperatures between 70 to 210 °F.

Please Contact With Us For More Information
Semi-Automatic Digital Bitumen Penetrometer

0 out of 5

STANDARDS : EN 1426; ASTM D5; AASHTO T49

Semi-Automatic Digital Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature.

Please Contact With Us For More…
Transtech Non-Nuclear Pavement Quality Indicator (PQI 380)

0 out of 5

Transtech Non-Nuclear Pavement Quality Indicator (PQI 380)

This version of the PQI is fully equipped with a touch screen and a user friendly graphical user interface.

Please Contact With Us For More…
Travelling Beam Device

0 out of 5

It is used to check for any irregularities in both concrete and bituminous road surfaces.

Please Contact With Us For More Information
Vacuum Extractor

0 out of 5

STANDARDS : ASTM D2172, AASHTO T164, EN 933-8.

Extractor is used for quantitative determination of bitumen content in hot mixed paving mixtures and pavement samples.

Please Contact With Us For More Information