-
ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2095 – Tensile Adhesives Testing Equipment
ASTM D2095 – This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens
under… -
ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube
ASTM D2105 – Fiberglass Tensile Test Equipment
ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment,… -
ASTM D2229 Test Fixture
ASTM D2229 – This test method covers the determination of the force required to pull a steel cord from a block of vulcanized rubber.
Please Contact With Us For More Information
-
ASTM D2344 – Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D2344 –Short Beam Shear Testing
ASTM D2344 – This test method determines the short-beam strength of high-modulus fiber-reinforced composite materials.
The specimen is a short beam machined from a curved or… -
ASTM D2519 – Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
Bond Strength Test Fixture
ASTM D2519 – This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil.
Please Contact With Us…
-
ASTM D2861 – Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics (Withdrawn 2020)
ASTM D2861 – This test method covers procedures for testing flexible materials consisting of copper foil combined with either dielectric film or with treated or
impregnated fabric to form flexible composites… -
ASTM D3032 – Standard Test Methods for Hookup Wire Insulation
Dynamic Cut – Through Test Fixture
ASTM D3032 – This test method covers procedures for testing hookup wire.
Please Contact With Us For More Information
-
ASTM D3167- Floating Roller Peel Test Fixture
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
ASTM D3167 is similar to the ASTM D1781 Climbing Drum Peel…
-
ASTM D3330 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Please Contact With Us For More…
-
ASTM D3354 – Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354 – This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic film.
It is not intended to measure susceptibility to blocking.
By… -
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
*** It is commonly used for composites…
-
ASTM D3433 – Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3433 – Fracture Cleavage Adhesives Testing Machine & Fixtures
ASTM D3433 – This test method (1, 2, 3, 4, 5)2 covers the determination of fracture strength in cleavage of adhesives when tested on standard specimens
and under specified…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06