ISO | Parsros Material Testing Equipments

BS EN ISO 23910 Test Fixture

This standard specifies a method for determining the stitch tear resistance of leather.

Please Contact With Us For More Information
EN ISO 1288-3 Test Fixture

EN ISO 1288-3 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building.

Please Contact With Us For More Information
EN ISO 14916 Test Fixture

EN ISO 14916 specifies the procedure to determine the tensile adhesive strength of thermally sprayed coatings under tension in the direction normal to the

surface of the coating by applying a…
EN ISO 3386-1 Test Fixture

This ISO standard covers the determination of material with a density up to 250 kg/m3.

Please Contact With Us For More Information
EN ISO 4624 Test Fixture

EN ISO 4624 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion

by carrying out a…
EN ISO 6259-1 Test Fixture

ISO 6259-1 specifies a method of determining the tensile properties of thermoplastics pipes

Please Contact With Us For More Information
EN ISO 898-1 Test Fixture

EN ISO 898-1 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature

range of 10 °C to…
EN ISO 898-2 Test Fixture

This part of ISO 898 – 2 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when

tested at…
ISO 10113 – Plastic Strain Ratio of Metallic Sheet Strip

ISO 10113 specifies a method for determining the plastic strain ratio of flat products (sheet and strip) made of metallic materials.

Please Contact With Us For More Information
ISO 10139-2 Test Fixture

ISO 10139-2 specifies requirements for softness, adhesion, water sorption and water solubility, as well as for packaging, marking and manufacturer’s instructions

for soft denture lining materials suitable for long-term use.

Please Contact With…
ISO 10275 – Tensile Strain Hardening Exponent of Metal Sheets and Strips

ISO 10275 specifies a method for determining the tensile strain hardening exponent of flat products (sheet and strip) made of metallic materials.

Please Contact With Us For More Information
ISO 10328 – Structural Testing of Lower Limb Prostheses

It Specifies procedures for static and cyclic strength tests on lower-limb prostheses which typically produce compound loadings by the application

of a single test force.

Please Contact With Us For More Information