-
ASTM C394 – Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.
Permissible core material forms… -
ASTM C557 – Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C557 covers the minimum performance standards for and properties of adhesives intended to bond the back surface paper of gypsum wallboard to wood framing
members.
Please Contact With Us For More Information
-
ASTM C633 – Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the
coating in a tension… -
ASTM C67 Test Fixture
ASTM C67 covers procedures for the sampling and testing of brick and structural clay tile.
Please Contact With Us For More Information
-
ASTM C719 Test Fixture
ASTM C719 is an accelerated laboratory procedure for evaluating the performance of a building sealant in a test configuration that is subjected to water immersion,
cyclic movement, and temperature change
Please Contact With…
-
ASTM C736 Test Fixture
ASTM C736 covers a laboratory procedure for the determination of the extension-recovery and adhesion of latex sealants.
Please Contact With Us For More Information
-
ASTM C749 Test Fixture
ASTM C749 the testing of carbon and graphite in tension to obtain the tensile stress-strain behavior
Please Contact With Us For More Information
-
ASTM C78 Test Fixture
ASTM C78 covers the determination of the flexural strength of concrete by the use of a simple beam with third-point loading
Please Contact With Us For More Information
-
ASTM C880 Test Fixture
ASTM C880 covers the procedure for determining the flexural strength of stone by use of a simple beam using quarter-point loading.
Please Contact With Us For More Information
-
ASTM C947 – Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM C952 Test Fixture
ASTM C952 provides two procedures for measuring bond strength of mortar to masonry units
Please Contact With Us For More Information
-
ASTM C961 – Standard Test Method for Lap Shear Strength of Sealants
ASTM C961 – This test method measures the cohesive strength of sealants when subjected to shear stresses, and also provides information regarding the adhesive bond to
the substrates being tested.
Please Contact With…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06