•

    EN 196-1 Test Fixture
    0 out of 5
  •

    EN 2243-2 Test Fixture
    0 out of 5

    EN 2243-2 defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal joints, at ambient or other

    temperatures.

    Please Contact With Us For More…

  •

    EN 2243-3 Test Fixture
    0 out of 5

    EN 2243-3 defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to honeycomb core joints, at ambient

    or other temperatures.

    Please Contact With Us For…

  •

    EN 2243-4 Test Fixture
    0 out of 5

    EN 2243-4 defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints,

    at ambient or other temperatures.

    Please Contact With Us For…

  •

    EN 2377 Test Fixture
    0 out of 5

    EN 2377 defines a method for the determination of the apparent interlaminar shear strength by delamination of textile glass fibre reinforced plastics produced

    in sheet form for aerospace use.

    Please Contact With Us…

  •

    EN 2562 Test Fixture
    0 out of 5

    EN 2562 specifies the method for the determination of the flexural strength and flexural modulus of carbon fibre reinforced plastics in the form of

    unidirectional laminates by a flexural test.

    Please Contact With…

  •

    EN 2850 Test Fixture
    0 out of 5

    EN 2850 defines a method for the determination of stress at failure and Young’s modulus in compression of carbon thermosetting resin unidirectional laminates.

    Please Contact With Us For More Information

  •

    EN 28510-1 Test Fixture
    0 out of 5

    EN 28510-1 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends

    Please Contact With Us For More Information

  •

    EN 50342-5 Test Fixture
    0 out of 5

    EN 50342-5 covers multicell battery housings produced of polypropylene as the preferred material for lead-acid batteries as an energy storage device

    for cranking combustion engines

    Please Contact With Us For More Information

  •

    EN 863 Test Fixture
    0 out of 5

    This test stanndard specifies a test method for measuring the puncture resistance of protective clothing or materials used for these products.

    Please Contact With Us For More Information

  •

    EN 868-5  Test Fixture
    0 out of 5

    EN 868-5 characterizes the seal strength of single-use sterilized medical packaging.

    This standard specifically focuses on packaging materials and systems for medical devices which need to be sterilized.

    Please Contact With Us For…

  •

    EN ISO 1288-3 Test Fixture
    0 out of 5

    EN  ISO 1288-3 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building.

    Please Contact With Us For More Information