-
ASTM C880 Test Fixture
ASTM C880 covers the procedure for determining the flexural strength of stone by use of a simple beam using quarter-point loading.
Please Contact With Us For More Information
-
ASTM C947 – Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM C952 Test Fixture
ASTM C952 provides two procedures for measuring bond strength of mortar to masonry units
Please Contact With Us For More Information
-
ASTM C961 – Standard Test Method for Lap Shear Strength of Sealants
ASTM C961 – This test method measures the cohesive strength of sealants when subjected to shear stresses, and also provides information regarding the adhesive bond to
the substrates being tested.
Please Contact With…
-
ASTM D1000 – Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1000 – This test method covers several test methods for the characterization of tapes used in electrical applications.
Please Contact With Us For More Information
-
ASTM D1002 – Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1048 Test Fixture
ASTM D1048 covers acceptance testing of rubber insulating blankets for protection of workers from accidental contact with live electrical conductors,
apparatus, or circuits.
Please Contact With Us For More Information
-
ASTM D1062 – Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D1335 Test Fixture
ASTM D1335 covers the measurement of force required to pull or break a tuft from a pile floor covering sample.
Please Contact With Us For More Information
-
ASTM D1388 Test Fixture
ASTM D1388 covers the measurement of stiffness properties of fabrics. Bending length is measured and flexural rigidity is calculated.
Two procedures are provided.
Please Contact With Us For More Information
-
ASTM D1414 – Standard Test Methods for Rubber O-Rings
ASTM D1414 – Rubber O-Ring Testing
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are… -
ASTM D143 – Standard Test Methods for Small Clear Specimens of Timber
ASTM D143 – This test method covers the determination of various strength and related properties of wood by testing small clear specimens.
This test method represents procedures for evaluating the different…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06