-
ASTM A1034 – Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1034 – This test method covers the testing of mechanical splices for reinforcing bars.
The test methods herein described are applicable to any type of mechanical splice manufactured to join steel…
-
ASTM A1064 – Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1064 – This specification covers carbon-steel wire and welded wire reinforcement produced from hot-rolled rod to be used for the reinforcement of concrete.
The steel wire is cold-worked, drawn or rolled,…
-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A185 Test Fikstürü
ASTM A185 covers welded wire reinforcement to be used for the reinforcement of concrete.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
The sample is prepared, and then submergned in various types…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein described are used to determine properties…
-
ASTM A48 – Standard Specification for Gray Iron Castings
ASTM A48 – This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.
Castings are classified on the basis of the tensile strength of… -
ASTM A720 Test Fikstürü
ASTM A720 covers determination of ductility utilizing Epstein test strips and a bending device for bending the strip over a predetermined radius.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM A931 – Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931 – This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force,
yield strength, elongation, and modulus of elasticity….
-
ASTM A974 Test Fikstürü
ASTM A974 covers gabions and gabion mattresses produced from metallic-coated welded wire fabric, and metallic-coated wire for spiral binders, lacing wire,
and stiffeners used to assemble the product.
Bilgi Almak İçin Lütfen…
-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06