-
ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399 -This test method covers the determination of fracture toughness (KIc and optionally KIsi) of metallic materials under predominantly linear-elastic,
Bilgi Almak İçin Lütfen…
-
ASTM E561 Test Fikstürü
ASTM E561 covers the determination of the resistance to fracture of metallic materials under Mode I loading at static rates using either of the following notched
and precracked specimens:
Bilgi Almak İçin…
-
ASTM E643 – Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM E643 – This test method covers the procedure for conducting the ball punch deformation test for metallic sheet materials intended for forming applications.
The test applies to specimens with thicknesses between… -
ASTM E647 Test Fikstürü
ASTM E647 covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM E8 – Tension Testing of Metallic Materials
ASTM E8 – This test method covers the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of
yield strength, yield point elongation, tensile strength,… -
ASTM E855 Test Fikstürü
ASTM E855 describes three test methods for determining the modulus of elasticity in bending, the bending proof strength, and the offset yield strength in bending
of metallic strips or sheets
Bilgi Almak…
-
ASTM E9 Test Fikstürü
ASTM E9 covers the apparatus, specimens, and procedure for axial-force compression testing of metallic materials at room temperature
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM F1554 – Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1554 – This specification covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron,
alloy, or high-strength low- alloy steel.Bilgi Almak İçin…
-
ASTM F3125 – High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F3125 – This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and
alloy steel, in inch and metric dimensions, in two strength grades, two… -
ASTM F88 – Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F88 – This test method covers the measurement of the strength of seals in flexible barrier materials. The test may be conducted on seals between a flexible
material and a…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06