-
EN 196-1 Test Fikstürü
EN 196-1 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 2243-2 Test Fikstürü
EN 2243-2 defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal joints, at ambient or other temperatures.
Bilgi Almak İçin Lütfen…
-
EN 2243-3 Test Fikstürü
EN 2243-3 defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to honeycomb core joints, at ambient
or other temperatures.
Bilgi Almak İçin Lütfen…
-
EN 2243-4 Test Fikstürü
EN 2243-4 defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints,
at ambient or other temperatures.
Bilgi Almak İçin Lütfen…
-
EN 2377 Test Fikstürü
EN 2377 defines a method for the determination of the apparent interlaminar shear strength by delamination of textile glass fibre reinforced plastics produced
in sheet form for aerospace use.
Bilgi Almak İçin…
-
EN 2562 Test Fikstürü
EN 2562 specifies the method for the determination of the flexural strength and flexural modulus of carbon fibre reinforced plastics in the form of
unidirectional laminates by a flexural test.
Bilgi Almak…
-
EN 2850 Test Fikstürü
EN 2850 defines a method for the determination of stress at failure and Young’s modulus in compression of carbon thermosetting resin unidirectional laminates.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 28510-1 Test Fikstürü
EN 28510-1 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 50342-5 Test Fikstürü
EN 50342-5 covers multicell battery housings produced of polypropylene as the preferred material for lead-acid batteries as an energy storage device
for cranking combustion engines
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 863 Test Fikstürü
This test standard specifies a test method for measuring the puncture resistance of protective clothing or materials used for these products.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 868-5 Test Fikstürü
EN 868-5 characterizes the seal strength of single-use sterilized medical packaging.
This standard specifically focuses on packaging materials and systems for medical devices which need to be sterilized.
Bilgi Almak İçin Lütfen…
-
EN ISO 1288-3 Test Fikstürü
EN ISO 1288-3 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06