ISO | ParsRos Malzeme Test Cihazları

BS EN ISO 23910 Test Fikstürü

0 out of 5

BS EN ISO 23910 specifies a method for determining the stitch tear resistance of leather.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
EN ISO 1288-3 Test Fikstürü

0 out of 5

EN ISO 1288-3 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
EN ISO 14916 Test Fikstürü

0 out of 5

EN ISO 14916 specifies the procedure to determine the tensile adhesive strength of thermally sprayed coatings under tension in the direction normal to the surface of the

coating by applying a…
EN ISO 3386-1 Test Fikstürü

0 out of 5

This ISO standard covers the determination of material with a density up to 250 kg/m3.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
EN ISO 4624 Test Fikstürü

0 out of 5

EN ISO 4624 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion

by carrying out a…
EN ISO 6259-1 Test Fikstürü

0 out of 5

ISO 6259-1 specifies a method of determining the tensile properties of thermoplastics pipes

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
EN ISO 898-1 Test Fikstürü

0 out of 5

EN ISO 898-1 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature

range of 10 °C to…
EN ISO 898-2 Test Fikstürü

0 out of 5

This part of ISO 898 -2 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested

at an…
ISO 10113 – Plastic Strain Ratio of Metallic Sheet Strip

0 out of 5

ISO 10113 specifies a method for determining the plastic strain ratio of flat products (sheet and strip) made of metallic materials.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 10139-2 Test Fikstürü

0 out of 5

ISO 10139-2 specifies requirements for softness, adhesion, water sorption and water solubility, as well as for packaging, marking and manufacturer’s instructions

for soft denture lining materials suitable for long-term use.

Bilgi Almak…
ISO 10275 – Tensile Strain Hardening Exponent of Metal Sheets and Strips

0 out of 5

ISO 10275 specifies a method for determining the tensile strain hardening exponent of flat products (sheet and strip) made of metallic materials.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 10319 – Geosynthetics Wide Width Tensile Test

0 out of 5

ISO 10319 describes an index test method for the determination of the tensile properties of geosynthetics (polymeric, glass, and metallic), using a wide-width strip.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz