ISO | Page 11 of 12 | ParsRos Malzeme Test Cihazları

ISO 844 – Rigid Cellular Plastics Compression Properties

0 5 üzerinden

ISO 844 Testing is the compressive strength of a cellular material determined by applying load to a test specimen with a square or circular cross section.

Bilgi Almak İçin Lütfen Bizimle
ISO 8490 – Modified Erichsen Cupping Test

0 5 üzerinden

This ISO standard specifies a method for determining the ability of sheets and strips having a thickness from 0,2 up to 2 mm and a width of 90 mm or…
ISO 8493 – Drift Expanding Test

0 5 üzerinden

ISO 8493 – In the drift-expanding test, a conical mandrel is pressed into a tube specimen via materials testing machine according to the tube’s inner diameter and the tube

is expanded.

Bilgi…
ISO 8494 – Flanging Test

0 5 üzerinden

ISO 8494 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation during flange formation.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 8510-1 Adhesive Peel Test

0 5 üzerinden

ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delam

Bilgi Almak İçin Lütfen…
ISO 9046 – Adhesion/Cohesion Properties of Sealants at Constant Temperature

0 5 üzerinden

This ISO standard specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used

in joints in building construction.

Bilgi Almak İçin Lütfen Bizimle
ISO 9073 Textiles Test Equipment

0 5 üzerinden

ISO 9073-18 specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9073-5 Mechanical Penetration of Nonwoven Fabrics

0 5 üzerinden

ISO 9073-5 specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9073-7 Bending Length of Nonwowens Textiles

0 5 üzerinden

ISO 9073-7 specifies a method for the determination of the bending length of nonwovens. Gives an equation for calculating the flexural rigity of the fabric from the bending length.

Bilgi Almak…
ISO 9187-1 Injection Equipment for Medical Use

0 5 üzerinden

ISO 9187-1 specifies materials, dimensions, capacities, performance and packaging requirements for three forms of glass ampoule (forms B, C and D) for injectable

pharmaceutical products.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9311-2 Shear Strength of Adhesives

0 5 üzerinden

This ISO standard specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9626 – Stainless Steel Needle Tubing for the Manufacture of Medical Devices

0 5 üzerinden

ISO 9626 applies to rigid stainless steel needle tubing suitable for use in the manufacture of hypodermic needles and other medical devices primarily for human use.

Bilgi Almak İçin Lütfen Bizimle