-
ASTM D2861 – Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D2861-14 – This test method covers procedures for testing flexible materials consisting of copper foil combined with either dielectric film or with treated or
impregnated fabric to form flexible composites used…
-
ASTM D2979 Test Fikstürü
ASTM D2979 covers measurement of the pressure-sensitive tack of adhesives.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3032 – Hookup Wire Insulation
Dynamic Cut – Through Test Fixture
This test method covers procedures for testing hookup wire.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3167 – Floating Roller Peel Resistance of Adhesives
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3330 – Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3354 – Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354 – This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic film.
It is not intended to measure susceptibility to blocking.
Bilgi…
-
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
This test procedure introduces the compressive force…
-
ASTM D3433 – Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
Fracture Cleavage Adhesives Testing Machine & Fixtures
ASTM D3433 – This test method (1, 2, 3, 4, 5)2 covers the determination of fracture strength in cleavage of adhesives when tested on standard specimens
and under specified conditions of preparation… -
ASTM D3479 –Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 – This test method determines the fatigue behavior of polymer matrix composite materials subjected to tensile cyclic loading.
The composite material forms are limited to continuous-fiber or discontinuous-fiber reinforced composites…
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 – Tape Tensile Strength + Elongation
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile…
-
ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate unwind tape either with a human…
-
ASTM D395 – Rubber Property — Compression Set
ASTM D395 – This test method covers the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air
or liquid media.
Bilgi Almak…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06