-
ASTM D6415 – Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415- Testing Fixture
ASTM D6415 Tesing fixture is useful to indicate the curved beam strength of a continuous fiber – reinforced composite material.
For the test run it is necessary to use…
-
ASTM D6484 – Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6484 – This test method determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced
by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D6636 – Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636 – This test method covers the measurement of the adhesion strength (180° peel) between plies of reinforced geomembranes such as internally
reinforced geomembranes and coated fabrics.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM D6641 – Compressive Properties of Polymer Matrix Composite Materials
ASTM D6641 – Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1)… -
ASTM D6671 – Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6671 – MIXED-MODE BENDING FRACTURE TOUGHNESS
ASTM D6671 – This test method covers the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode
I to Mode II loading… -
ASTM D6862 – Standard Test Method for 90 Degree Peel Resistance of Adhesives
Peel strength testing for adhesive tapes can be performed using different test procedures.
The 90 degree peel test is one of the most common since this test generally results in the…
-
ASTM D695 – Compressive Properties of Rigid Plastics
ASTM D695 – describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sample being used.
The test can be…
-
ASTM D7078 – Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078 – This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a
V-notched specimen between two pairs of loading rails.
Bilgi…
-
ASTM D7137 – Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7137 – This test method covers compression residual strength properties of multidirectional polymer matrix composite laminated plates, which have
been subjected toquasi-static… -
ASTM D7205 – Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D7205 – This test method determines the quasi-static longitudinal tensile strength and elongation properties of fiber reinforced polymer matrix
(FRP) composite bars commonly used as tensile elements in reinforced, prestressed, or…
-
ASTM D7249 – Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
Sandwich Flexural Stiffness by ASTM D7249
ASTM D7249 – This test method covers determination of facing properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments
produce…
-
ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness
ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness
This practice covers determination of the flexural and transverse shear stiffness properties of flat sandwich constructions subjected to flexure
in such a manner…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06