-
EN 2243-4 Test Fikstürü
EN 2243-4 defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints,
at ambient or other temperatures.
Bilgi Almak İçin Lütfen…
-
EN 2377 Test Fikstürü
EN 2377 defines a method for the determination of the apparent interlaminar shear strength by delamination of textile glass fibre reinforced plastics produced
in sheet form for aerospace use.
Bilgi Almak İçin…
-
EN 2562 Test Fikstürü
EN 2562 specifies the method for the determination of the flexural strength and flexural modulus of carbon fibre reinforced plastics in the form of
unidirectional laminates by a flexural test.
Bilgi Almak…
-
EN 2850 Test Fikstürü
EN 2850 defines a method for the determination of stress at failure and Young’s modulus in compression of carbon thermosetting resin unidirectional laminates.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 28510-1 Test Fikstürü
EN 28510-1 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 50342-5 Test Fikstürü
EN 50342-5 covers multicell battery housings produced of polypropylene as the preferred material for lead-acid batteries as an energy storage device
for cranking combustion engines
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 863 Test Fikstürü
This test standard specifies a test method for measuring the puncture resistance of protective clothing or materials used for these products.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN 868-5 Test Fikstürü
EN 868-5 characterizes the seal strength of single-use sterilized medical packaging.
This standard specifically focuses on packaging materials and systems for medical devices which need to be sterilized.
Bilgi Almak İçin Lütfen…
-
EN ISO 1288-3 Test Fikstürü
EN ISO 1288-3 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN ISO 14916 Test Fikstürü
EN ISO 14916 specifies the procedure to determine the tensile adhesive strength of thermally sprayed coatings under tension in the direction normal to the surface of the
coating by applying a…
-
EN ISO 3386-1 Test Fikstürü
This ISO standard covers the determination of material with a density up to 250 kg/m3.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
EN ISO 4624 Test Fikstürü
EN ISO 4624 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion
by carrying out a…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06